Technology

How to connect the wireless network to the printer?

Printer are a vital device used in a variety of job. From home to business it has evolved into an essential device. In the past, users had to make use of the cable. The user must transfer all the data to that device in order to print out the documents. New printers now offer wireless printing. The user no longer has to connect the printer with any specific device via a cable. The printer is able to be connect to any device they wish.

The printer is connected to an internet-connected wireless network

There are a few aspects to consider prior to configuring the devices. You can select between traditional as well as WPS methods. It is also possible to use the WPS connection if your router permits it. Find your router’s physical WPS pin. This is a very simple way to connect and users are able to easily set it up. Also visit printer repair duabi.

Printer connection using WPS pin

To connect your printer to WPS then look for the router and the printer. The printer must be equipped with Wi-Fi connectivity and the router need to have an actual WPS pin. Before connecting, check the status of your router. Choose an access point that has been WPA secure. Always ensure that you have a secure password on the router , so that only authenticated users can gain access to it. The connection to the network must be solid. Check the printer, then connect to the power source. Make sure you check the power indicator of the printer, and then begin configuring your printer to the PC.

  1. Print at the printer, then connect to its Wi-Fi
  2. The Wi-Fi needs to start blinking
  3. The printer will then begin to search for networks that are available
  4. Go to the router and verify the WPS pin.
  5. Allow the WPS pin

If the printer detects your WPS connection, the Wi-Fi indicator is stable. Following the connection, users must verify the network. It might be connect to other network. To check the connection, print out the page for configuration. Place the pages in the tray and place them in the correct order. Click the Resume button on the printer, and wait until the lamp flashes 15 time. The user will be present with the printout of configuration. Check the printout, and then the name of the network and the status. If the information is correct then the user needs to look for connected devices. The device should be open and install by the driver. After the driver is install, user are able to print the prints via a network connection.

Installing the driver for your printer in the operating system

In order to print out the printed documents it is necessary for the user to install the driver. Without this driver, the printer will fail. The driver transfers the print command to the printer. The user will receive the driver on a CD along with his printer. If you have a device with disc drivers simply insert the CD and then copy the configuration. On other devices, go to the web page of the printer model you have and look for the driver. Download the setup for your device. Install the driver setup for installation. Open the document, and attempt to enter your print request.any other issue related to printer also visit printer repair dubai. The printer will appear on the list. Click on the printer. Take a look at the pages, and then print the prints.

Canon mg3600 How do I connect to Wi Fi using the standard Connection method?

If your router isn’t compatible with WPS, you are able to connect the printer by the normal procedure. Users must run the driver configuration.

  1. Setup your settings on the device
  2. On the first screen, tap Next.
  3. Users will be able to see the screen for connection type
  4. Choose Wireless connection
  5. Make sure that the power lamp is on the printer.
  6. On the wireless connection, tap Connect to the Network option.
  7. You’ll see a connection screen. Select your cable-free setup option.
  8. When connect the printer, the network might be disable for a few second
  9. After pressing the Next button, the Next option and the location screen will be display.
  10. Select the current region and the country.
  11. Choose the language you prefer.
  12. EULA page will be displayed on your desktop

Take the time to read the agreement thoroughly and click the “Yes” button. A screen for setup completion will pop up and display details about the Model number of your device and the SSID that the printer is connected to. If both of these details are correct, then the printer is successfully connected and will be linked to your network. Take a test printout by using network printing. If the printer displays issues with network printing; look for help from a professional.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button